1/2" #1 Morse Taper Drill D115 HSS ISO235 Blue
SKU#:
Minimum Quantity is 1 • Sold in increments of 1
Enter a value between 1 and 99999 in increments of 1.
Twist drill with Morse taper shank suitable for a variety of materials and industrial applications. The tang at the end of the shank is used for ejecting the drill from the socket or sleeve. The drive and alignment is derived from the taper lock.
| Item # | Diameter d1 (mm) | Diameter d1 (inch) | Length l1 (mm) | Length l2 (mm) | Shank Size | Qty | Stock | Price | Action |
|---|---|---|---|---|---|---|---|---|---|
| D1150600 | |||||||||
| D1150873 | |||||||||
| D1151032 | |||||||||
| D1151191 | |||||||||
| D1151269 | |||||||||
| D1151350 | |||||||||
| D1151400 | |||||||||
| D1151650 | |||||||||
| D1151800 | |||||||||
| D1151900 | |||||||||
| D1151984 | |||||||||
| D1152000 | |||||||||
| D1152024 | |||||||||
| D1152103 | |||||||||
| D1152150 | |||||||||
| D1152223 | |||||||||
| D1152400 | |||||||||
| D1152600 | |||||||||
| D1153050 | |||||||||
| D1153056 | |||||||||
| D1153150 | |||||||||
| D1153250 | |||||||||
| D1153300 | |||||||||
| D1153334 | |||||||||
| D1153350 | |||||||||
| D1153650 | |||||||||
| D1153810 | |||||||||
| D1154200 | |||||||||
| D1154250 | |||||||||
| D1154350 | |||||||||
| D1154445 | |||||||||
| D1154800 | |||||||||
| D1154950 | |||||||||
| D1155874 | |||||||||
| D1156668 |
- General purpose HSS drill
- Suitable for materials up to 900N/mm²
| ISO | VDI | Description | Condition | Hardness | Strength | Optimal |
|---|---|---|---|---|---|---|
| P | 1 | Steel - Non-alloy, cast & free cutting (~ 0.15 %C) | Annealed | 125HB | 440MPa | |
| P | 2 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Annealed | 190HB | 640MPa | |
| P | 3 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Quenched & Tempered | 250HB | 840MPa | |
| P | 4 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Annealed | 270HB | 910MPa | |
| P | 5 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Quenched & Tempered | 300HB | 1010MPa | |
| P | 6 | Steel - Low alloy & cast < 5% of alloying elements | Annealed | 180HB | 610MPa | |
| P | 7 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 275HB | 930MPa | |
| P | 8 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 300HB | 1010MPa | |
| P | 10 | Steel - High alloy, cast & tool | Annealed | 200HB | 680MPa | |
| M | 14.1 | Stainless Steel - Austenitic | Age Hardened | 180HB | 610MPa | |
| K | 15 | Cast Iron, Grey (GG) - Ferritic / Pearlitic | 180HB | 610MPa | ||
| K | 16 | Cast Iron, Grey (GG) - Pearlitic | 260HB | 880MPa | ||
| K | 17 | Cast Iron, Nodular (GGG) - Ferritic | 160HB | 570MPa | ||
| K | 18 | Cast Iron, Nodular (GGG) - Pearlitic | 250HB | 840MPa | ||
| K | 19 | Cast Iron, Malleable - Ferritic | 130HB | 460MPa | ||
| K | 20 | Cast Iron, Malleable - Pearlitic | 230HB | 780MPa | ||
| H | 40 | Cast Iron - Chilled | Cast | 400HB | 1350MPa |
KEY
OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: N
Material: HSS
Finish: Blu
Max Cut Depth: 5xD
Shank Form: MTS
Helix Angle: Designation: N
Point Tolerance: h8
Point Angle: 118
Point Form: Form A
Cutting Edges: ul
Standard: DIN345
