0.5x0.4x2.0x4mm 2 Flute Endmill Ballnose 30° HA VSM TiSiN

SKU#:

E5820051

Item is in stock

8 in stock

NZ$83.57

QTY

Enter a value between 1 and 99999 in increments of 1.

Item #	Diameter d1 (mm)	Length l1 (mm)	Length l2 (mm)	Length l3 (mm)	Diameter d2 (mm)	Diameter d3 (mm)	z	Rad	Stock	Price	Action
E5820021	0.20	50	0.2	0.5	4	0.15	2	0.1	Item is in stock1 in stock	NZ$102.11	Wishlist
E5820022	0.20	50	0.2	1	4	0.15	2	0.1	Item is in stock4 in stock	NZ$96.14	Wishlist
E5820023	0.20	50	0.2	1.5	4	0.15	2	0.1	Item is in stock1 in stock	NZ$98.84	Wishlist
E5820051	0.50	50	0.4	2	4	0.45	2	0.25	Item is in stock8 in stock	NZ$83.57	Wishlist
E5820052	0.50	50	0.4	6	4	0.45	2	0.25	Item is in stock6 in stock	NZ$83.52	Wishlist
E5820103	1.00	50	0.8	8	4	0.95	2	0.5	Item is in backorderItem is in backorder	NZ$58.85	Wishlist
E5820104	1.00	50	0.8	10	4	0.95	2	0.5	Item is in stock1 in stock	NZ$53.51	Wishlist
E5820153	1.50	50	1.2	16	4	1.45	2	0.75	Item is in stock1 in stock	NZ$65.00	Wishlist
E5820204	2.00	50	1.6	16	4	1.95	2	1	Item is in stock3 in stock	NZ$66.97	Wishlist
E5820206	2.00	75	1.6	30	4	1.95	2	1	Item is in stock2 in stock	NZ$92.46	Wishlist
E5820302	3.00	60	2.4	16	6	2.85	2	1.5	Item is in stock1 in stock	NZ$84.80	Wishlist
E5820304	3.00	75	2.4	30	6	2.85	2	1.5	Item is in backorderItem is in backorder	NZ$96.31	Wishlist

ISO	VDI	Description	Condition	Hardness	Strength
P	9	Steel - Low alloy & cast < 5% of alloying elements	Quenched & Tempered	350HB	1180MPa
P	11	Steel - High alloy, cast & tool	Hardened & Tempered	325HB	1100MPa
P	13	Steel - Corrosion resistant & cast - Martensitic	Quenched & Tempered	240HB	810MPa
M	14.2	Stainless Steel - Duplex		250HB	840MPa
M	14.3	Stainless Steel - Precipitation Hardening		250HB	840MPa
S	34	High temperature alloys - Ni / Co based	Age Hardened	350HB	1180MPa
S	35	High temperature alloys - Ni / Co based	Cast	320HB	1080MPa
S	37.3	Titanium & Titanium alloys - Alpha / Beta alloys	Age Hardened		1170MPa
S	37.5	Titanium & Titanium alloys - Beta alloys	Age Hardened		1400MPa
H	38.1	Hardened steel	Hardened & Tempered	45HRC

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials

Designation: NH

Material: VHM

Finish: TiSiN

Shank Form: HA

Helix Angle: R30

Point Tolerance: 0 / -0.020

Shank Tolerance: h6

Point Form: Ballnose

Standard: Sutton

Rake Angle: 10°-12°

Product: E/MILL B/N E582 0.5mm x 0.4 x 2.0 x4 2F 30° HA VHM TiSiN