tttt

0.5x0.4x6.0x4mm 2 Flute Endmill Ballnose 30° HA VSM TiSiN

SKU#:

E5820052
Item is in stock5 in stock
NZ$100.22

Minimum Quantity is 1 • Sold in increments of 1

Enter a value between 1 and 99999 in increments of 1.

Micro Endmill 2 Flute Suitable for materials up to 35-52 HRC TiSiN for high speed machining

Item #Diameter
d1 (mm)		Length
l1 (mm)		Length
l2 (mm)		Length
l3 (mm)		Diameter
d2 (mm)		Diameter
d3 (mm)		zRadQtyStockPriceAction
E58200210.20500.20.540.1520.1
Item is in stock1 in stock
NZ$122.53
E58200220.20500.2140.1520.1
Item is in stock4 in stock
NZ$115.37
E58200230.20500.21.540.1520.1
Item is in stock1 in stock
NZ$118.61
E58200510.50500.4240.4520.25
Item is in stock8 in stock
NZ$100.28
E58200520.50500.4640.4520.25
Item is in stock5 in stock
NZ$100.22
E58201011.00500.8440.9520.5
Item is in stock2 in stock
NZ$78.12
E58201031.00500.8840.9520.5
Item is in backorderItem is in backorder
NZ$70.62
E58201041.00500.81040.9520.5
Item is in stock3 in stock
NZ$64.21
E58201531.50501.21641.4520.75
Item is in stock1 in stock
NZ$78.00
E58202042.00501.61641.9521
Item is in stock3 in stock
NZ$80.36
E58202062.00751.63041.9521
Item is in stock2 in stock
NZ$110.95
E58203023.00602.41662.8521.5
Item is in stock1 in stock
NZ$101.76
E58203043.00752.43062.8521.5
Item is in backorderItem is in backorder
NZ$115.57

  • Micro Endmill Ballnose
  • Suitable for materials up to 35-52 HRC
  • TiSiN for high speed machining
ISOVDIDescriptionConditionHardnessStrengthOptimal
P9Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered350HB1180MPa
P11Steel - High alloy, cast & toolHardened & Tempered325HB1100MPa
P13Steel - Corrosion resistant & cast - MartensiticQuenched & Tempered240HB810MPa
M14.2Stainless Steel - Duplex250HB840MPa
M14.3Stainless Steel - Precipitation Hardening250HB840MPa
S34High temperature alloys - Ni / Co basedAge Hardened350HB1180MPa
S35High temperature alloys - Ni / Co basedCast320HB1080MPa
S37.3Titanium & Titanium alloys - Alpha / Beta alloysAge Hardened1170MPa
S37.5Titanium & Titanium alloys - Beta alloysAge Hardened1400MPa
H38.1Hardened steelHardened & Tempered45HRC

KEY

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: NH
Material: VHM
Finish: TiSiN
Shank Form: HA
Helix Angle: R30
Point Tolerance: 0 / -0.020
Shank Tolerance: h6
Point Form: Ballnose
Standard: Sutton
Rake Angle: 10°-12°
High Resolution Image
Low Resolution Image