1x1.5x10x4mm 2 Flute Endmill E580 40° HA VHM TiSiN

Name: E/MILL E580 1mm x 1.5 x 10 x4 2F 40° HA VHM TiSiN
Brand: Sutton Tools
SKU: E5800103
Price: 46.6 NZD

SKU#:

E5800103

Item is in stock

2 in stock

NZ$46.60

QTY

Enter a value between 1 and 99999 in increments of 1.

Item #	Diameter d1 (mm)	Length l1 (mm)	Length l2 (mm)	Length l3 (mm)	Diameter d2 (mm)	Diameter d3 (mm)	z	Stock	Price	Action
E5800021	0.20	50	0.2	0.5	4	0.16	2	Item is in stock2 in stock	NZ$87.35	Wishlist
E5800051	0.50	50	0.7	2	4	0.45	2	Item is in stock2 in stock	NZ$71.95	Wishlist
E5800053	0.50	50	0.7	6	4	0.45	2	Item is in stock3 in stock	NZ$71.95	Wishlist
E5800092	0.90	50	1.4	6	4	0.75	2	Item is in backorderItem is in backorder	NZ$69.75	Wishlist
E5800101	1.00	50	1.5	6	4	0.95	2	Item is in backorderItem is in backorder	NZ$49.30	Wishlist
E5800103	1.00	50	1.5	10	4	0.95	2	Item is in stock2 in stock	NZ$46.60	Wishlist
E5800104	1.00	50	1.5	12	4	0.95	2	Item is in stock2 in stock	NZ$53.16	Wishlist
E5800121	1.20	50	1.8	6	4	1.15	2	Item is in backorderItem is in backorder	NZ$51.12	Wishlist
E5800181	1.80	50	2.7	6	4	1.75	2	Item is in stock1 in stock	NZ$51.12	Wishlist
E5800201	2.00	50	3	6	4	1.95	2	Item is in backorderItem is in backorder	NZ$47.87	Wishlist
E5800205	2.00	50	3	16	4	1.95	2	Item is in stock1 in stock	NZ$51.99	Wishlist

ISO	VDI	Description	Condition	Hardness	Strength
P	9	Steel - Low alloy & cast < 5% of alloying elements	Quenched & Tempered	350HB	1180MPa
P	11	Steel - High alloy, cast & tool	Hardened & Tempered	325HB	1100MPa
P	13	Steel - Corrosion resistant & cast - Martensitic	Quenched & Tempered	240HB	810MPa
M	14.2	Stainless Steel - Duplex		250HB	840MPa
M	14.3	Stainless Steel - Precipitation Hardening		250HB	840MPa
S	34	High temperature alloys - Ni / Co based	Age Hardened	350HB	1180MPa
S	35	High temperature alloys - Ni / Co based	Cast	320HB	1080MPa
S	37.3	Titanium & Titanium alloys - Alpha / Beta alloys	Age Hardened		1170MPa
S	37.5	Titanium & Titanium alloys - Beta alloys	Age Hardened		1400MPa
H	38.1	Hardened steel	Hardened & Tempered	45HRC

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials

Designation: NH

Material: VHM

Finish: TiSiN

Shank Form: HA

Helix Angle: R40

Point Tolerance: 0 / -0.020

Shank Tolerance: h6

Point Form: Square End

Standard: Sutton

Rake Angle: 10°-12°

Product: E/MILL E580 1mm x 1.5 x 10 x4 2F 40° HA VHM TiSiN