Cart: empty
tttt

11.0mm 2 Flute Endmill Regular E603 R30 VHM TiAlN

SKU#:

E6031100
Item is in backorderItem is in backorder
NZ$93.40

Minimum Quantity is 1 • Sold in increments of 1

Enter a value between 1 and 99999 in increments of 1.

2 Flute Slot Drill R30 N Suitable for materials up to 1600 N/mm2 TiAlN for longer tool life

Item #Diameter d1 (mm)Diameter d1 (inch)Length l1 (mm)Length l2 (mm)Diameter d2 (mm)zQtyStockPriceAction
E60301001.00-38432
Item is in backorderItem is in backorder
NZ$23.85
E60301501.50-384.532
Item is in stock4 in stock
NZ$23.85
E60302002.00-38632
Item is in backorderItem is in backorder
NZ$23.85
E60302502.50-389.532
Item is in backorderItem is in backorder
NZ$23.85
E60303003.00-381232
Item is in backorderItem is in backorder
NZ$23.85
E60303503.50-501242
Item is in backorderItem is in backorder
NZ$27.29
E60304004.00-501442
Item is in backorderItem is in backorder
NZ$27.29
E60304504.50-501662
Item is in backorderItem is in backorder
NZ$36.12
E60305005.00-501662
Item is in backorderItem is in backorder
NZ$36.12
E60306006.00-501962
Item is in stock1 in stock
NZ$31.10
E60307007.00-631982
Item is in backorderItem is in backorder
NZ$49.88
E60308008.00-632082
Item is in backorderItem is in backorder
NZ$49.88
E60309009.00-7522102
Item is in backorderItem is in backorder
NZ$77.12
E603100010.00-7522102
Item is in backorderItem is in backorder
NZ$77.12
E603110011.00-7525122
Item is in backorderItem is in backorder
NZ$93.40
E603120012.00-7525122
Item is in backorderItem is in backorder
NZ$93.40
E603140014.00-8932142
Item is in backorderItem is in backorder
NZ$144.21
E603160016.00-8932162
Item is in backorderItem is in backorder
NZ$172.13
E603180018.00-10038182
Item is in backorderItem is in backorder
NZ$228.17
E603200020.00-10038202
Item is in backorderItem is in backorder
NZ$264.90
E603250025.00-10038252
Item is in backorderItem is in backorder
NZ$408.86

  • 2 Flute Slot Drill R30 N
  • Suitable for materials up to 1600 N/mm2
  • TiAlN for longer tool life
ISOVDIDescriptionConditionHardnessStrengthOptimal
P1Steel - Non-alloy, cast & free cutting (~ 0.15 %C)Annealed125HB440MPa
P2Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Annealed190HB640MPa
P3Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Quenched & Tempered250HB840MPa
P4Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Annealed270HB910MPa
P5Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Quenched & Tempered300HB1010MPa
P6Steel - Low alloy & cast < 5% of alloying elementsAnnealed180HB610MPa
P7Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered275HB930MPa
P8Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered300HB1010MPa
P9Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered350HB1180MPa
P10Steel - High alloy, cast & toolAnnealed200HB680MPa
P11Steel - High alloy, cast & toolHardened & Tempered325HB1100MPa
M14.1Stainless Steel - AusteniticAge Hardened180HB610MPa
M14.2Stainless Steel - Duplex250HB840MPa
K15Cast Iron, Grey (GG) - Ferritic / Pearlitic180HB610MPa
K16Cast Iron, Grey (GG) - Pearlitic260HB880MPa
K17Cast Iron, Nodular (GGG) - Ferritic160HB570MPa
K18Cast Iron, Nodular (GGG) - Pearlitic250HB840MPa
K19Cast Iron, Malleable - Ferritic130HB460MPa
K20Cast Iron, Malleable - Pearlitic230HB780MPa

KEY

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: N
Material: VHM
Finish: TiAlN
Shank Form: HA
Helix Angle: Designation: N
Point Tolerance: h10
Shank Tolerance: h6
Point Form: Square End
Standard: Sutton
Type: N (finishing)
Rank Angle: 12
High Resolution Image
Low Resolution Image
Product: E/MILL E603 11.0mm REG.2 Flutes R30 VHM TiAlN