Cart: empty
tttt

3.0mm 2 Flute Endmill Regular E605 Ball Nose R30 VHM TiAlN

SKU#:

E6050300
Item is in backorderItem is in backorder
NZ$24.89

Minimum Quantity is 1 • Sold in increments of 1

Enter a value between 1 and 99999 in increments of 1.

Ballnose Slot Drill 2 Flute Suitable for materials up to 1600 N/mm2 TiAlN for longer tool life

Item #Diameter d1 (mm)Length l1 (mm)Length l2 (mm)Diameter d2 (mm)zQtyStockPriceAction
E60501001.0038432
Item is in backorderItem is in backorder
NZ$24.94
E60501501.50384.532
Item is in backorderItem is in backorder
NZ$24.94
E60502002.0038632
Item is in backorderItem is in backorder
NZ$26.11
E60502502.50389.532
Item is in backorderItem is in backorder
NZ$26.11
E60503003.00381232
Item is in backorderItem is in backorder
NZ$24.89
E60503503.50501242
Item is in backorderItem is in backorder
NZ$28.07
E60504004.00501442
Item is in stock7 in stock
NZ$32.14
E60505005.00501662
Item is in backorderItem is in backorder
NZ$36.58
E60506006.00501962
Item is in stock1 in stock
NZ$34.87
E60507007.00631982
Item is in backorderItem is in backorder
NZ$52.13
E60508008.00632082
Item is in stock3 in stock
NZ$53.50
E60509009.007520102
Item is in backorderItem is in backorder
NZ$78.24
E605100010.007522102
Item is in backorderItem is in backorder
NZ$75.16
E605110011.007525122
Item is in backorderItem is in backorder
NZ$102.25
E605120012.007525122
Item is in backorderItem is in backorder
NZ$92.57
E605140014.008932142
Item is in backorderItem is in backorder
NZ$168.61
E605160016.008932162
Item is in backorderItem is in backorder
NZ$181.03
E605180018.0010038182
Item is in backorderItem is in backorder
NZ$276.15
E605200020.0010038202
Item is in backorderItem is in backorder
NZ$298.84
E605250025.0010038252
Item is in backorderItem is in backorder
NZ$486.27

  • Ballnose Slot Drill 2 Flute
  • Suitable for materials up to 1600 N/mm2
  • TiAlN for longer tool life
ISOVDIDescriptionConditionHardnessStrengthOptimal
P1Steel - Non-alloy, cast & free cutting (~ 0.15 %C)Annealed125HB440MPa
P2Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Annealed190HB640MPa
P3Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Quenched & Tempered250HB840MPa
P4Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Annealed270HB910MPa
P5Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Quenched & Tempered300HB1010MPa
P6Steel - Low alloy & cast < 5% of alloying elementsAnnealed180HB610MPa
P7Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered275HB930MPa
P8Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered300HB1010MPa
P9Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered350HB1180MPa
P10Steel - High alloy, cast & toolAnnealed200HB680MPa
P11Steel - High alloy, cast & toolHardened & Tempered325HB1100MPa
M14.1Stainless Steel - AusteniticAge Hardened180HB610MPa
M14.2Stainless Steel - Duplex250HB840MPa
K15Cast Iron, Grey (GG) - Ferritic / Pearlitic180HB610MPa
K16Cast Iron, Grey (GG) - Pearlitic260HB880MPa
K17Cast Iron, Nodular (GGG) - Ferritic160HB570MPa
K18Cast Iron, Nodular (GGG) - Pearlitic250HB840MPa
K19Cast Iron, Malleable - Ferritic130HB460MPa
K20Cast Iron, Malleable - Pearlitic230HB780MPa

KEY

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: N
Material: VHM
Finish: TiAlN
Shank Form: HA
Helix Angle: Designation: N
Point Tolerance: h10
Shank Tolerance: h6
Point Form: Ballnose
Standard: Sutton
Type: N (finishing)
Rank Angle: 12
High Resolution Image
Low Resolution Image
Product: E/MILL E605 3.0mm REG. BALL 2 Flutes R30 VHM TiAlN