Cart: empty
tttt

M2x0.4 Gun Tap T100 6H N DIN371 B HSSE

SKU#:

T1000200
Item is in backorderItem is in backorder
NZ$36.61

Minimum Quantity is 1 • Sold in increments of 1

Enter a value between 1 and 99999 in increments of 1.

General purpose use Suitable for materials up to 1000N/mm2 Through holes Depths up to 3 x d1

Item #SizeLength l1 (mm)Length l2 (mm)Length l3 (mm)Diameter d2 (mm)sqLength l4 (mm)zDrill ØQtyStockPriceAction
T1000200M2x0.4458-2.802.1521.6
Item is in backorderItem is in backorder
NZ$36.61
T1000300M3x0.55611183.502.7632.5
Item is in backorderItem is in backorder
NZ$24.97
T1000400M4x0.76313214.503.4633.3
Item is in stock6 in stock
NZ$25.22
T1000500M5x0.870162564.9834.2
Item is in backorderItem is in backorder
NZ$25.76
T1000600M6x180193064.9835
Item is in backorderItem is in backorder
NZ$26.57
T1000800M8x1.2590223586.2936.8
Item is in stock4 in stock
NZ$30.49
T1001000M10x1.510024391081138.5
Item is in stock4 in stock
NZ$38.06

  • Suitable for materials up to 1000N/mm2
  • Through holes
  • Depths up to 3 x d1
ISOVDIDescriptionConditionHardnessStrengthOptimal
P1Steel - Non-alloy, cast & free cutting (~ 0.15 %C)Annealed125HB440MPa
P2Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Annealed190HB640MPa
P3Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Quenched & Tempered250HB840MPa
P4Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Annealed270HB910MPa
P6Steel - Low alloy & cast < 5% of alloying elementsAnnealed180HB610MPa
P7Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered275HB930MPa
P10Steel - High alloy, cast & toolAnnealed200HB680MPa
K15Cast Iron, Grey (GG) - Ferritic / Pearlitic180HB610MPa
K17Cast Iron, Nodular (GGG) - Ferritic160HB570MPa
K19Cast Iron, Malleable - Ferritic130HB460MPa
K20Cast Iron, Malleable - Pearlitic230HB780MPa
N21Aluminum & Magnesium, wrought alloy - Non Heat Treatable60HB210MPa
N22Aluminum & Magnesium, wrought alloy - Heat TreatableAge Hardened100HB360MPa
N23Aluminum & Magnesium, cast alloy ?12% Si - Non Heat Treatable75HB270MPa
N24Aluminum & Magnesium, cast alloy ?12% Si - Heat TreatableAge Hardened90HB320MPa
N26Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1%110HB390MPa
N27Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn)90HB320MPa

KEY

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: N
Material: HSSE
Finish: Brt
Max Cut Depth: 3xD
Shank Form: A
Standard: DIN371
Thread Form: Metric
Nut Tolerance: 6H
Lead: Form B
High Resolution Image
Low Resolution Image
Product: TAP T100 M 2x0.4 6H GUN N DIN371 B HSSE