tttt

M6x1 Gun Tap T122 6H W DIN371 B HSSE Ni

SKU#:

T1220600
Item is in backorderItem is in backorder
NZ$35.39

Minimum Quantity is 1 • Sold in increments of 1

Enter a value between 1 and 99999 in increments of 1.

Suitable for use in soft materials CrN for copper and non-ferrous materials Through holes Depths up to 3 x d1

Item #SizeLength l1 (mm)Length l2 (mm)Length l3 (mm)Diameter d2 (mm)sqLength l4 (mm)zDrill ØQtyStockPriceAction
T1220300M3x0.55611183.502.7632.5
Item is in stock2 in stock
NZ$33.26
T1220400M4x0.76313214.503.4633.3
Item is in backorderItem is in backorder
NZ$33.26
T1220500M5x0.870162564.9834.2
Item is in backorderItem is in backorder
NZ$34.33
T1220600M6x180193064.9835
Item is in backorderItem is in backorder
NZ$35.39
T1220800M8x1.2590223586.2936.8
Item is in backorderItem is in backorder
NZ$30.98
T1221000M10x1.510024391081138.5
Item is in backorderItem is in backorder
NZ$50.21

  • Suitable for use in soft materials
  • CrN for copper and non-ferrous materials
  • Through holes
  • Depths up to 3 x d1
ISOVDIDescriptionConditionHardnessStrengthOptimal
P1Steel - Non-alloy, cast & free cutting (~ 0.15 %C)Annealed125HB440MPa
P2Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Annealed190HB640MPa
P3Steel - Non-alloy, cast & free cutting (~ 0.45 %C)Quenched & Tempered250HB840MPa
P4Steel - Non-alloy, cast & free cutting (~ 0.75 %C)Annealed270HB910MPa
P6Steel - Low alloy & cast < 5% of alloying elementsAnnealed180HB610MPa
P7Steel - Low alloy & cast < 5% of alloying elementsQuenched & Tempered275HB930MPa
N21Aluminum & Magnesium, wrought alloy - Non Heat Treatable60HB210MPa
N22Aluminum & Magnesium, wrought alloy - Heat TreatableAge Hardened100HB360MPa
N23Aluminum & Magnesium, cast alloy ?12% Si - Non Heat Treatable75HB270MPa
N24Aluminum & Magnesium, cast alloy ?12% Si - Heat TreatableAge Hardened90HB320MPa
N26Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1%110HB390MPa
N27Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn)90HB320MPa
N28Copper & Copper alloys (Brass/Bronze) - Bronze (CuSn)100HB360MPa

KEY

OptimalEffectivePSteelMStainlessKCast IronNNon-Ferous MetalsSTitanium & Super AlloysHHard Materials
Designation: W
Material: HSSE
Finish: Ni
Max Cut Depth: 3xD
Shank Form: A
Standard: DIN371
Thread Form: Metric
Nut Tolerance: 6H
Lead: Form B
High Resolution Image
Low Resolution Image